Pillar 01
Safe DC Voltage
SolarEdge SafeDC™ automatically de-energises the array to a safe voltage the moment the inverter or grid shuts down — protecting property, installers, electricians and firefighters working near live PV.
Service
SolarEdge — panel-level power, plant-level safety.
Kyra Photon Tech is a technology partner for SolarEdge in India. Every SolarEdge deployment we build combines panel-level DC optimisation, SafeDC™ shutdown, three-phase C&I inverters and module-level monitoring — delivering more yield per square metre with lower O&M cost over the plant's life.
Overview
What we deliver.
SolarEdge enables more energy generation from each solar module by mitigating power losses that result from mismatch between modules — with SolarEdge, weaker modules do not affect the performance of strong ones. The SolarEdge system is future-proofed against potential risks that can cause decreased lifetime energy production.
String-inverter plants are only as good as their weakest module. Shade, soiling and mismatch on a single panel drags the entire string down — a compromise that gets more expensive as module prices fall relative to labour and roof area.
SolarEdge's architecture solves this by tracking Maximum Power Point (MPP) at the module level with a Power Optimizer wired to each panel, then aggregating optimised DC into a purpose-built inverter. The result is more energy production on the same roof, faster payback and lower O&M cost over 25 years.
Alongside performance, SolarEdge's SafeDC™ protection de-energises the DC array to a safe voltage whenever the inverter or grid shuts down — a critical safety feature for installers, electricians and firefighters working near live PV arrays.
The SolarEdge stack
Four pillars, one architecture.
Every SolarEdge-based plant Kyra Photon delivers uses the same four building blocks — chosen and configured to the project's scale, module type and site conditions.
Pillar 02
Power Optimizer
A DC/DC converter connected to each solar module tracks Maximum Power Point (MPP) per panel — increasing total energy production and shortening ROI, especially on partially-shaded or mismatched arrays.
Pillar 03
Inverters
Three-phase inverters engineered for commercial and industrial rooftops, Agri-PV, carports, floating PV and small utility scale.
- Deliver greater energy production by pairing with SolarEdge Power Optimizers
- Reduce equipment and installation costs with unique SolarEdge architecture
- Lower O&M costs with the ability to pinpoint issues using module-level monitoring as well as remote troubleshooting
- Instill confidence with advanced safety, such as arc fault protection and emergency voltage shutdown
Pillar 04
Monitoring System
Module-, string- and system-level fault detection with no extra communication wiring — data travels over the existing DC power lines. Faults are localised to the exact panel, not just the string.
Ready to switch on your rooftop?
Send us your electricity bill and a rooftop photograph — we'll come back with a feasibility report, generation estimate and indicative CAPEX within 48 hours.