GI Sheet MMS
Module Mounting Structure engineered for galvanised iron sheet roofs on industrial sheds and warehouses.
Service
Rooftop solar — engineered for every roof, from 1 kW up.
Grid-tied rooftop plants for homes, commercial buildings and industrial sheds — a minimum plant size of 1 kW delivers around 5 kWh per day and needs about 80 sq. ft. of shadow-free roof. Five-year warranty, zero maintenance from the customer, and financing on tap.
Overview
What we deliver.
Kyra Photon Tech engineers rooftop solar for the three roof categories that dominate the Indian C&I landscape — RCC slabs, GI sheet sheds and asbestos sheets — plus residential terraces. Every project starts with a physical site study, a shadow analysis and a load-profile review before a single module is specified.
We deliver rooftop plants turnkey: mounting structure, modules, inverters, cabling, protection, net-metering coordination and commissioning. Plants ship with a 5-year workmanship warranty, standard OEM warranties on modules and inverters, and Kyra Photon's O&M so the customer never has to become an electrician.
For customers who want to fund the plant without touching working capital, we facilitate loans through our partner banks — often structured so the EMI stays at or below the current monthly electricity bill.
Key benefits
Why a Kyra Photon rooftop plant.
From 1 kW upwards
Minimum plant size 1 kW — roughly 5 kWh/day of generation on ~80 sq. ft. of shadow-free roof. Scales to multi-MW sheds.
5-year warranty
Five-year workmanship warranty on Kyra's engineering and installation, on top of standard OEM warranties on modules and inverters.
Zero customer maintenance
O&M is ours. Cleaning, inspections, tightening, remote monitoring and troubleshooting — the customer just reads the meter.
Loan facilitation
Financing partners lined up for both residential and C&I projects. EMIs typically structured at or below current monthly electricity bills.
Grid, hybrid or captive
Grid-tied with net-metering, hybrid with storage, or captive configurations — the electrical topology is designed to the customer's use profile.
Every roof type
GI sheet, asbestos sheet, GI fabrication and RCC roofs — four mounting-structure families, one for every industrial or commercial roof we've seen.
Process
How a rooftop plant gets built.
- Step 01
Feasibility & site study
Roof survey, shadow analysis, structural assessment and utility bill review to confirm plant size and generation estimate.
- Step 02
Design & measurement
Detailed engineering — module layout, string sizing, cable routing, structural drawings and single-line diagrams.
- Step 03
Installation
Site-based crew of engineers, project manager and electricians executes MMS, module mounting, cabling and inverter wiring.
- Step 04
Testing & commissioning
IR testing, string open-circuit voltage checks, earthing verification, inverter commissioning and utility handover.
- Step 05
Ongoing quality inspection
Post-commissioning periodic inspection under Kyra Photon O&M, with remote monitoring and reporting on performance.
Mounting structures
Four MMS families — one for every roof.
The mounting structure is where a rooftop plant either lasts 25 years or starts leaking after three monsoons. We pick and detail the MMS to the specific roof type on your site.
Asbestos Sheet MMS
Purpose-built structure for asbestos cement sheet roofs, with load-spreading brackets that respect existing roof integrity.
GI Fabrication MMS
Custom GI fabrication for unusual roof geometries, curved sheets and site-specific structural constraints.
Flatfix Solution
Ballasted flat-fix racking for RCC roofs — no roof penetration, orientation tuned to maximise annual yield.
Ready to switch on your rooftop?
Send us your electricity bill and a rooftop photograph — we'll come back with a feasibility report, generation estimate and indicative CAPEX within 48 hours.